Playground safety surfacing
Poured-in-Place Rubber Playground Surfacing
A seamless, cushioned rubber surface poured on site. The shock-absorbing layer is sized to your equipment's fall height, then finished with a colored wear layer that stays put and is easy to keep clean.
- Seamless and accessible for wheelchairs, walkers and strollers
- Thickness matched to your equipment's critical fall height
- No raking, refilling or loose material scattered around the site
- Custom color blends, patterns and simple game graphics
Quote onlyCommercial gradePurchase orders accepted
Illustration, not to scale. Final layer thickness is set in your quote.
Get a free PIP quote
Tell us about your site and we'll send a custom quote. No obligation.
How poured-in-place surfacing is built
PIP is mixed and poured on your site by a trained crew in two layers over a firm base. The result is one continuous surface with no seams, gaps or loose material.
1
Prepared base
The surface needs a firm, well-drained base, typically asphalt or concrete. Your quote assumes a properly prepared base, so let us know what's on the ground today.
2
Cushion layer
Recycled rubber bound with polyurethane absorbs impact. Its depth is set by the critical fall height of your equipment, so taller equipment needs a thicker cushion.
3
Wear layer
A top layer of colored EPDM rubber granules gives a smooth, durable finish in the colors you choose, including blends, patterns and simple graphics.
Thickness is set by your fall height
Every quote is sized to the tallest point a child could fall from on your equipment, called the critical fall height. For example, an 8 ft fall height typically calls for about 3.75 in of total surfacing. Share your equipment or its spec sheets and we'll confirm the right thickness to meet ASTM F1292 impact guidelines.
What we need for an accurate quote
- Project city and ZIP code
- Total area in square feet, or rough dimensions
- Highest fall height of your equipment
- What's on the ground today and whether it needs removing
- Preferred colors and any deadline
Good to know
- Pouring needs dry weather and mild temperatures to cure properly
- Lighter colors stay cooler in full sun than dark colors
- Colors with some black granules cost less than 100% color
- Pair it with playground borders or ramps for a clean edge
Frequently asked questions
How much does poured-in-place surfacing cost?
Pricing depends on your area, required thickness, colors and site conditions, so every project is quoted individually. Send us your details above and we'll prepare a custom quote with no obligation.
Do you install it?
PIP must be installed by a trained crew. Tell us whether you'd like installation options or materials only, and we'll confirm what's available for your location in your quote.
Can it go over grass or dirt?
PIP needs a firm, well-drained base such as asphalt or concrete. If your site is grass, dirt or loose fill today, the base will need to be prepared first. Let us know your current ground and we'll factor it into your quote.
Is it ADA accessible?
Yes. A properly installed poured surface is firm, stable and seamless, which makes it one of the most accessible surfacing options for wheelchairs, walkers and strollers.
How do I maintain it?
Regular sweeping or blowing off debris and an occasional rinse keep it clean. Inspect it for wear in high-traffic spots like under swings and at slide exits, and repair small damage early. Some systems also benefit from a periodic protective top coat.
Can I add equipment later?
It's best to install equipment before the surface is poured. Adding equipment later means cutting and patching the surface, so plan your layout first. Our free layout design service can help.
Plan your surfacing
Not sure how much area you need? Start with one of our free planning tools.