Playground Use Zone & Surfacing Calculator
Find out how much space your playground needs and how much safety surfacing to order, in seconds.
We'll show the largest equipment that fits with a 6 ft safety zone on every side.
Find this on the product's spec sheet. Many spec sheets also list the full use zone. Use that if it's larger.
Belt swings need clear space 2× the beam height in front and behind, plus 6 ft at each end of the frame.
Rubber mulch is typically installed 6 in. deep under play equipment. Check the product's safety specs for your fall height.
6 ft on every side
Most stationary equipment, like play structures, climbers and spinners, needs at least 6 ft of cushioned surfacing around it.
Swings need more
Belt swings need clear space twice the beam height in front and behind. An 8 ft swing needs 16 ft each way.
Depth matters
Loose-fill surfacing compacts over time. Install to the recommended depth and top it up so it stays protective.
Want us to check your layout?
Send us your measurements and site photos. We'll suggest equipment that fits and put together a full quote with surfacing and installation.
These are planning estimates based on general CPSC and ASTM use-zone guidance. Tall slides, multi-axis swings and some structures need larger zones, and required surfacing depth depends on fall height. Always check the manufacturer's specifications, or ask us to review your plan.